CLEANSHIELD
Metalized Static Shielding Film
CFB6000-ULO*

*ULTRA LOW OUTGASSING



CFB6000-ULO - This Metalized Static Shielding Film was developed for disk drive and semiconductor packaging applications that require exceptional Chemical Cleanliness and ESD Shielding. The advanced technology of the CFB6000-ULO film provides a clean, low contaminating package with reduced levels of ionic burden, non-volatile residue and outgassing. The advanced material technology of our film provides ESD protection, and improved chemical cleanliness. Layers of metal and plastic provide Static Shielding and ESD Protection for sensitive items.

Standards: Meets electrical and physical requirements of Mil-PRF-81705 Type III, ESD S541, EIA 625 and ESDA Standards, and can be a part of a static control program complying to ANSI/ESD S20.20.

 

Physical Properties
Material Multi layer structure of Static Dissipative Exterior, Metalized Shield, and Static Dissipative Polyethylene Interior
Available As:  Bags, Sheeting
Clarity:  Transparent (Light transmission 40%)
Thickness:  3 Mil

 

Film Properties
ASTM Method
Typical Value
Tensile Strength
ASTM D-882
25 pounds
Seam Strength
Mil-PRF-81705
pass
Surface Resistivity/ Resistance
 
Interior
ASTM D257
<10^12 ohms/square
Exterior
ASTM D257
<10^12 ohms/square
Metal
ASTM D257 
100 ohms
Static Shielding
EIA 541
<30 volts
Static Shielding
EOS/ESD S11.31
<10 nJ
Static Decay
FTMS 101 MTH 4046
<0.05 seconds

 

Chemical Properties
Test Method
Typical Value
Ionic Contamination: Cl, F, Br, NO2, NO3, So4, PO4, Li, Na, NH4, MG, Ca
Extract/lC (per ion)
<15 ng/cm2
Non-Volatile Residue (NVR)
Gravimetric analysis
< 5 ug/cm2
Silicone, amine, amide content
FTIR of NVR residue  
Not detected
Outgassing (total)
Dynamic Headspace GC/MS
< 700 ng/g2
Particles (>/= 0.5 microns)
Liquid particle count of DI water extract
< 3400 per cm2
Non-Corrosive
FTMS 101 MTH 3005
pass
Polycarbonate Compatibility
EIA 564
pass

 

Note: Outgassing analysis by Static Headspace GC/MS is obsolete. Dynamic Headspace GC.MS data conforming to IDEMA M11-99 is provided. Data is from analysis of film that was converted into bags.

Request Additional Information

 

Home | Capabilities | Materials | Spec Sheets | News | Contact Us

Cleanroom Film & Bags
1405 N. Manzanita, Orange, CA 92867

714-744-8361   Fax: 714-744-8360

Email: info@cleanroomfilm.com

AN AFFILIATE OF ULTRASONIC CLEANING